 |
|
|
|
Specification
Solvent reservoirs are pressurized by
an inert gas supply. The solvent rises through the tube and then
flows through a series of two filter columns which remove moisture from
the solvent.Purified solvents can
be dispensed into collection glassware at the system or directly to any
glove box.
| Frame Material |
304 Stainless Steel |
| Tube Material |
316 Stainless Steel |
| Inert Gas |
Nitrogen or Argon |
| Working Gas Pressure |
5psi |
| Dimension |
click here |
| Accessories |
click here |
| Column Capacity |
800L of purified solvent before
column replacement is required |
| Column Material |
316 Stainless Steel |
| Flow Rate |
<1000mL / min |
| Filter |
0.5 / 7 / 15 micron S.S. filter |
| Dispensing Adaptor |
24/40, 14/20, 29/42, 19/24 (other
size also available) |
| Solvents that can be
purify |
Alcohol, Acetonitrile, Benzene, Chloroform, Chlorobenzene, Dichlormethane, DME, Ether, Hexane, Hexanes, Heptane,
Methanol, Pentane, Toluene, THF,
Triethylamine, Pyridine, Diisopropylethylamine etc |
| Purifying Material |
Activated Alumina, Activated Copper
or Molecular Sieves (depends on solvents) |
| Purify |
low ppm level (more details, click
here) |
| Reservoir Capacity |
5L, 10L, 20L, 50L or 100L |
| Reservoir Material |
304 Stainless Steel, with
quick-connect fitting |
| Vacuum Pump |
Oil free diaphragm vacuum pump, 220Vac or 115Vac |
| Flammable Cabinet |
meets OSHA and NFPA CODE30 or
EN14470-1 |
| Ventilation |
can be connected to an adequate
ventilation system |
|
|
hengmaoli@gmail.com